Austin · San Antonio · The I-35 Corridor
We build it, we clean it,we keep it running.
Commercial solar in Central Texas — rooftop and carport installation, scheduled panel cleaning, and the O&M contract that stops a good array quietly turning into a bad one. Same company, start to finish.
- 38 MW
- Commercial capacity installed
- 640+
- Arrays under service contract
- 14
- Years in Central Texas
- 4.9
- Average rating
Three Things, Done Properly
Most solar companies do one of these and subcontract the rest. We carry all three in house, which is why the people who built your array are the ones who show up to service it.
Install
Commercial Rooftop Solar
Flat-roof ballasted and attached racking on warehouses, retail, light industrial and office. We design to the roof you have, not to the biggest system we can sell.
Carport & Ground Mount
Parking canopies and ground arrays where the roof can't carry the load or the shade is worth more than the kilowatts.
Battery & Interconnection
Storage sized to your demand charges, and the interconnection paperwork run through Austin Energy, Oncor, Pedernales or CPS on your behalf.
Cleaning
Scheduled Panel Cleaning
Deionized water, soft brush, no detergents and no abrasives. Two to four visits a year depending on what settles on your roof.
Post-Storm & Construction Washes
After a dust event, a hailstorm or a neighboring build-out, a one-off wash with before-and-after production figures.
Maintenance
Preventive O&M Contracts
Annual or semi-annual inspection: thermal scan, torque checks, combiner and conduit inspection, vegetation and drainage, written report with photos.
Inverter & Electrical Repair
Diagnosis, warranty claim handling with the manufacturer, and replacement. We stock the inverters most common on Central Texas commercial roofs.
Monitoring & Production Audits
We watch your production against what the array should be making and call you when it drifts — not the other way around.
Re-Roof Removal & Reinstall
When the roof under a 10-year-old array needs replacing, we pull the system, store it, and set it back with new flashings and a fresh warranty.
A Dirty Array Doesn't Fail. It Just Quietly Earns Less.
Central Texas is hard on panels. Cedar pollen in February, caliche dust off every construction site within a mile, farm dust west of town, and months between real rain. Soiling takes a few percent off production a year here, and more on a low-tilt commercial roof where nothing ever washes itself off.
Nobody notices, because the system is still running. The monitoring portal shows a number and the number looks like a number. It takes a baseline and somebody watching the drift to tell you that you have been giving away 6% since spring.
What we won't do on your roof
No pressure washers, no detergents, no tap water left to dry into hard-water spots, and nobody walking on the modules. Abrasives and pressure cause micro-cracks that void the module warranty, and the damage shows up in year three as a string that never quite recovers.
Signs your array wants a visit
- Production down year over year on comparable weather
- One string consistently below the others in the portal
- Visible film, pollen banding or bird mess along the low edge
- Construction, a quarry or an unpaved lot within half a mile
- No cleaning since commissioning — the most common answer we get
- A hail or high-wind event in your ZIP in the last year
- Vegetation grown into the morning shade line
We service arrays we didn't install, including ones whose original installer has since gone out of business. Ask the chat in the corner what a visit looks like for your roof size.
How a Commercial Job Runs
Most of the calendar is interconnection, and most of the surprises are avoidable. You get the same project manager from assessment through the first year of service.
- 1
Site Assessment
Week 1
We get on the roof, measure the usable area, check the structure and the service, and pull twelve months of your interval data from the utility.
- 2
Design & Proposal
Weeks 2–3
One system, one number, and the production model behind it. You see the shading study and the assumptions, not just the payback year.
- 3
Interconnection & Permit
Weeks 4–10
The slowest part of every commercial job, and the part we handle without you chasing it. We give you a written status every other Friday.
- 4
Build
1–3 weeks
Our own crews. Roof penetrations flashed by a licensed roofer on staff, and your roof warranty documented before anything goes down.
- 5
Commissioning
Day of PTO
Thermal scan of every string, monitoring brought online, and a walkthrough with whoever will be looking at the dashboard.
- 6
Service Plan
Ongoing
Cleaning and inspection on a schedule from day one. The arrays that keep making money are the ones somebody is actually watching.
Free Roof Assessment
About an hour on site. You get the usable roof area, the structural and electrical constraints, a production estimate from your own twelve months of utility data, and — if you already have an array — a written condition report. No obligation and no kitchen-table close.
- Shop
- 4801 Freidrich Ln, Suite 220
Austin, TX 78744 - Phone
- (512) 555-0147
- License
- TECL #38114 · NABCEP certified · Fully insured
Request an Assessment
We confirm within one business day.